Water Treatment Questions
-
With the Filter Restore, add 16 oz (1/2 bottle) to 2-1/2 gallons of water. We usually put this in a 5-gallon bucket. Then soak your pleated filters overnight. Then rinse the filter thoroughly. Typically, you do all of your filters using the same solution, so you may reuse ...
-
This is a guide on how to use the Mineral Purifier stick with your Hot Tub. Throw in a capful of Refresh with every use. Throw in 1/2 capful of Boost once a week or as needed and test for PH once a week. Mineral Purifier Video Mineral Purifier Starter Kit
-
My Hot Tub pH Is High: How to Lower It
High pH (7.5 or higher) can cause cloudy water, scale, and itchy skin, and it makes your sanitizer work less well. Here's how to bring it back into range, based on our Arctic Spas maintenance instructions. 1. Confirm with a test strip Before adding anything, dip a test strip such as our LaMotte ... -
Onzen Troubleshooting Cloudy Water
**Onzen Troubleshooting Guide** **What should I do if my water is cloudy?** 1. Test pH (Should be between 7.2 and 7.5 ppm). Adjust if necessary with Adjust Down. 2. Adjust the Onzen run time to 24 (On24). Don't forget to turn it back down when the water is back to clear. 3. Measure the salt leve... -
**What to do if your surface feels like sandpaper and/or has calcium buildup?** **Cause** - Anytime the pH rises too high, even if it is for a short period of time, the calcium in the water will precipitate out and start forming on the surface of the spa. It will start out as a white powder and ...