How to Winterize Your Arctic Spa

Arctic Spas are built to run all winter, so most customers just keep them running with the cover on. If you'll be away for a long time, or you'd like to shut your spa down for the winter, it needs to be winterized so no water freezes in the lines.

We can have a tech do it for you if you're in our service area. Email Support@ArcticSpasUtah.com or call us to schedule. Having our service team do both the winterizing and the spring startup is the best way to protect your spa, because freeze damage from incorrect winterizing isn't covered by the warranty.

Do-it-yourself steps

You'll need about 1 to 1.5 gallons of non-toxic RV antifreeze (depending on the model), a funnel with a flexible spout, and a wet/dry shop vac.

  1. Turn off the power at the breaker and drain the spa.
  2. Remove the unions on the pumps and heater so all the water drains out.
  3. Use the wet/dry vac to pull the water out of the jets and lines. Remove the filter and vacuum out the filter canister.
  4. Reattach the unions on the pumps and heater.
  5. Remove the diverter valves and pour about 16 oz of RV antifreeze down each diverter position (left, center, right).
  6. If you have a waterfall, remove the control handle and pour about 16 oz down that line.
  7. Pour about 1 tablespoon of antifreeze down each jet line, and get some into the pumps and heater.
  8. Pour about a quart of antifreeze into the filter canister.
  9. If you have a Peak Ozone system, drain its mixing chamber and fill it with antifreeze until it flows out of the ozone jet.
  10. Disconnect the wet end of the circulation pump and leave it off.
  11. Make sure every line has some antifreeze in it, then put the cover on and lock it.

In the spring, our service team can do the startup for you, or contact us and we'll walk you through it.

Nov 17, 2026

Not finding what you're looking for? Contact Us Directly